People who are not familiar with the purification industry may not know the meaning of the term "wastewater ratio", which actually refers to the ratio of pure water obtained and wastewater generated during the water production process of the equipment. What if the wastewater ratio of pure water equipment is greater than the normal value? Below, Jiajie Water Treatment will provide a detailed introduction for everyone.

What is wastewater ratio?

The wastewater ratio refers to the volume ratio of pure water produced by the water purifier to the sewage discharged during a company's time. The "wastewater ratio 1:3" of a water purifier refers to the amount of wastewater produced by the purifier during water production, resulting in 3 parts of the purified water. The sewage contains rust, virus infections, and residues such as bacteria and stones, which will be discharged.

The "wastewater ratio" actually refers to this throttling device, which is installed at the inlet and outlet of the wastewater pipe of the water purifier, and controls the sewage to be discharged according to the necessary proportion according to the flow limiting valve.

What is the reason for the high wastewater ratio in pure water equipment?

1. The working pressure of the source water is not enough for two kilograms or the increase of the pump is not enough for five kilograms.

2. The sewage gate valve is not related to a suitable part (if there is a sewage gate valve).

3. The specification and model of the wastewater ratio (1 tubular component) are incorrect.

4. The composition of the source water is quite complex, which means that the source water is very poor.

5. The RO membrane is blocked.

6. The filter element must be removed and replaced.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题