Many people have introduced the maintenance and upkeep of industrial pure water equipment, but it is not comprehensive. How should we carry out comprehensive maintenance of industrial pure water equipment? Actually, it needs to be operated from daily, monthly, annual and other dimensions. Below, Yingjia Jie Water Treatment will provide a detailed introduction for everyone.

1、 Regular maintenance and upkeep

The actual operation and maintenance personnel, based on their usual management experience, use methods such as disassembly, inspection, and touch to carry out critical inspections of key parts of the machine equipment using testing instruments and instrument panels. If common faults are found, they should be immediately cleared and recorded. Maintenance personnel shall provide on-site service and inspection at least once a month.

2、 Monthly maintenance and upkeep

1. Replace the filter element;

2. Check if all three-way joints are leaking water;

3. Check if the reading on the dashboard is appropriate;

4. Check if the pressure difference is normal;

5. Eliminate the surface dust of the generator set, passivate stainless steel for rust prevention treatment, and add rust inhibitor;

6. Check if the anchor bolts and interfaces have fallen off.

7. Evaluate the mechanical equipment and organic chemistry challenges that will arise. The key to the mechanical equipment challenges is the damage to the O-ring, salt water sealing, pumps, pipelines, and gate valves. The first challenge in organic chemistry is the inappropriate addition of acid: high amounts of acid can damage the membrane or cause scaling based on sulfates (if hydrochloric acid is used), while low doses can cause scaling based on sulfides or metal hydroxides or environmental pollution;

8. Check if the cable is hot and if the connector is loose;

9. When cleaning components, careful consideration should be given to whether there is any damage. For easily rusted parts, after cleaning, oil should be applied to prevent rust;

10. During the maintenance of machinery and equipment, the responsible person or key person in charge should fill out the information maintenance record card, carefully fill in the information according to the requirements of the new project in the form, and then hand it over to the relevant staff for storage.

3、 Maintenance and upkeep for this year

1. Disassemble and replace quartz sand, activated carbon, softened resin, PP filter element, RO reverse osmosis RO membrane;

2. Verify whether the standard values of each security protector meet the required standards;

3. Check if the detection of the conductivity meter camera is accurate, and adjust it if there is any difference;

4. Investigate and verify the actual operation of the instrument panel, including pressure gauges, steam flow meters, pH meters, conductivity meters, etc., and correct them again if necessary. Check the connection status of all cable lines and tighten them;

5. During the entire process of inspection and maintenance, attention should be paid to personal safety and the safety of the machinery and equipment. Maintenance work is prohibited until the operation of the machinery and equipment is terminated; When carrying out maintenance on electric machinery and electrical equipment routes, it is necessary to pay attention to natural ventilation in the welding and laser cutting workplace, and to keep fire extinguishing equipment readily available.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题