With the development of society, people are paying more and more attention to water quality, and more and more people are choosing pure water treatment equipment. Do you know how pure water precipitates? Below is a brief introduction to the small pure water sedimentation equipment.

In general, the sedimentation method is mainly a natural sedimentation method with large volume and low flow rate, commonly known as the sedimentation method.

One method is coagulation: this method mainly uses coagulants such as iron, aluminum, and polymers to prevent coagulation, bridge with impurities in water, and produce large particle precipitated materials, which are then removed by other devices.

One method is filtration: this method mainly uses pure water equipment and filter material devices to treat the water, saving impurities in the water and obtaining clean water resources.

The softening method uses chemical reagents and cation exchange resins to remove calcium, magnesium, and iron ions from water.

Pipeline connection method for purified water treatment equipment

1. The connection of the pipeline system should comply with the Construction Specification for Water Supply and Drainage Pipelines

2. Connect the inlet and outlet pipes according to the control diameter.

3. Manual valves should be installed on the inlet and outlet pipelines, and bypass valves should be installed between the outlet pipes to facilitate the discharge of residues during the welding process of the device and not contaminate the resin. The second is convenient maintenance.

4. The outlet is equipped with a sampling valve, and the inlet pipe is equipped with a Y-shaped filter.

5. The length of the drainage pipe should be as short as possible (< 6m). Valves should not be installed. During installation, only polytetrafluoroethylene tape can be used for sealing.

6. There should be some distance between the drainage pipe and the surface of the drainage ditch to avoid siphoning.

7. There are separate supports between the pipes, and it is not allowed to transfer the gravity and stress of the pipes to the control valve.

Qingzhou Kexin Water Treatment Equipment Co., Ltd. is an enterprise engaged in the production and manufacturing of water treatment equipment, purified water treatment equipment, purified water equipment, mineral water equipment, and food and beverage machinery. Our company has accumulated rich design and production experience over the years, and our products have reached a good level in the same industry. We can customize and produce products according to different customer requirements. Our company's products have received high praise from customers.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题