In the industrial production process, larger equipment generally has specific usage requirements and precautions. As a common machine in the industrial production process, industrial pure water equipment also has very clear usage requirements and precautions. Therefore, I will now introduce the specific precautions when using industrial pure water equipment.

Industrial pure water equipment

1. Temperature

After running for too long, the temperature of the material in the equipment will increase. Within a certain temperature range, higher temperatures will reduce the viscosity of the material, which is actually more conducive to water production. However, if the temperature is too high, it will have an impact on the composite film. If the composite film is damaged, it will lead to a decrease in the quality of water produced and also affect the efficiency of water production. Therefore, when using industrial pure water equipment for consumption, it is important to pay attention to this point. Temperature can be used reasonably to improve water production efficiency, but it should not be too high.

2. Pressure

A certain amount of pressure during equipment operation is beneficial for producing water, but there is an upper limit to the operable pressure. Once this limit is exceeded, excessive pressure will cause deformation of the composite membrane, affecting its use and accelerating the aging of the revived membrane. So during use, it is important to handle the pressure well. Too little pressure can lead to a decrease in efficiency, but too much pressure can also affect the lifespan of the equipment.

3. PH value

The pH value that composite films can be tested varies depending on the material, and most composite films can withstand pH values between 4 and 7. But if the pH value is not within this range, it is necessary to choose a suitable composite film based on the specific pH value, because if the pH value is not appropriate, the damage to the composite film is relatively large, and in severe cases, it can directly lead to the damage of the composite film, directly affecting the production and operation of the equipment.

In the process of using industrial pure water equipment, it is necessary to grasp the above three points, and the pH value is particularly important. Therefore, it is necessary to measure the pH value of the water that needs to be filtered in advance to avoid affecting the composite membrane.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题