简体中文简体中文 VietnameseVietnamese PersianPersian 繁体中文繁体中文 AlbanianAlbanian IrishIrish ArabicArabic

What's wrong with the high conductivity of pure water equipment- Pure Water Equipment - Jiajie - Jiajie Pure Water Equipment Manufacturer


Pure water equipment is not allowed to have any problems at any stage during operation, and if there is a high conductivity, it is not allowed to exist. Without timely treatment, the machine cannot continue to be used. Why does this problem occur? How to solve it?

1. Source water

The source water body has changed, and the conductivity of the source water has increased, which naturally poses a risk to the production of water.

Solution: Change water resources.

2. Preparation processing

Mechanical filters and activated carbon filters are not immediately backwashed on time (leakage conductivity will increase relatively).

Solution: Immediately clean the filter element.

3. RO reverse osmosis system software

1) The RO reverse osmosis membrane of the pure water equipment is damaged or has exceeded its service life and must be replaced.

2) The security filter for RO leakage was dirty, blocked, and had a large pressure difference and was not immediately replaced.

3) When the desalination rate and water production rate of RO decrease by 10% or the working pressure of RO leakage increases by 10%, it is necessary to immediately carry out cleaning (pure water equipment cleaning and maintenance method).

Solution: Disassemble and replace the relative spare parts.

4. Actual operation

Is it necessary to strictly follow the regulations of the RO generator set manufacturer to carry out operation and maintenance (especially when it becomes large or fake); Is the data information such as high temperature and pH leakage during water production within the effective range.

Solution: Increase maintenance and control water temperature.

5. Able to moderately adjust the utilization rate of pure water equipment to improve the conductivity of produced water.

When your pure water equipment system software has been running for 3 to 5 years and the water production time is relatively long, and good cleaning has been carried out, the conductivity of the pure water system is always high.

Solution: The RO membrane must be disassembled and replaced.


专业水处理的疑难问题,产品选型问题,可以单击下面的微信二维码电话联系贺工在线指导,长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题

佳洁纯水资深技术贺工
How to replace the softened water resin of pure water equipm
Previous 2024年04月15日
What is the reason for the low output of pure water equipmen
Next 2024年04月15日

相关推荐