People never get better in a thousand days, flowers never get red in a hundred days, and machines are the same. Even after using them for a long time, they will still give you a good look. Taking pure water equipment as an example, various problems of various sizes often occur. So how should these faults be handled?

1. The equipment keeps jumping up when the water is full

If such a malfunction occurs in the water purification equipment, it must be a situation of system software leakage. The first type will be insufficient working pressure of the source water, the second type will be a pressure relief failure of the check valve, and the third type will be a failure of the high-voltage switchgear. These faults are all caused by the equipment constantly jumping up after the water is full.

2. Pure water not discharged when the pressure tank is full

At this point, it is necessary to check whether the pressure tank gate valve is damaged or if there is a leakage fault in the pressure tank. In addition, if the activated carbon of the rear camera is blocked, this type of fault can also occur.

3. There is a serious imbalance in the proportion of sewage and purified water

In such a situation, the first step is to check if the cleaning relay is faulty or if it has already been damaged. The second is to check the sewage proportion meter, which can cause malfunctions if it is excessively connected or blocked. Is the final clearance caused by the blockage of the RO reverse osmosis membrane leading to a significant decrease in its filtration rate.

4. The host is constantly cleaned

This type of malfunction is caused by the loosening of the cleaning power switch and the ineffective wastewater ratio, and most of them can only be caused by these two reasons.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题