The most feared thing about pure water equipment may be the presence of bacteria, because once this exceeds the standard, not only will the water quality be unqualified, but it may also cause certain harm to the equipment. So how to avoid and remove the occurrence of bacteria in reverse osmosis membranes? Below, Jiajie Water Treatment will introduce some methods to you.

How to avoid bacteria in reverse osmosis membranes of pure water equipment?

1. Inspection

RO reverse osmosis leakage, RO reverse osmosis concentrated water, water produced by each membrane shell, total output water bacterial value, and conductivity value.

2. For membrane shells with high conductivity

Conduct probe testing and remove all leakage points.

3. RO reverse osmosis source water side

Add non air oxidizing pesticides and fungicides to eliminate bacteria.

How to remove bacteria from reverse osmosis membranes of pure water equipment?

1. It is necessary to maintain the regular cleaning of RO reverse osmosis water purification equipment.

2. If the RO reverse osmosis water purification equipment has been out of use for more than ten days, the nylon pipe for sewage discharge should be raised to the exchange column to allow the non drainage pipeline to operate. If it is not necessary in the long term, the salt tank and epoxy resin should be removed and each component of the machinery and equipment should be avoided from rusting. The softened water equipment that needs to be discontinued can be rebuilt. When it reaches the point where the saline water has been sucked, the reconstruction process will be terminated and the softened water equipment will be saved. By using recycled salt water bubbles like this epoxy resin, it is not easy for bacteria to grow when RO reverse osmosis water purification equipment is put into use, and epoxy resin is not prone to all hazards.

3. The application of epoxy resin should also consider the natural environment. For example, some pump rooms are located in the basement of villas, and the difficulty of softening or not softening in summer is not significant. However, some are in the soil, and even the sun can directly reach them. If the temperature in the natural environment is relatively high, it is necessary to flush them on time. After the RO reverse osmosis water purification equipment is discontinued in summer, the turbid water in the incoming water pipeline also causes significant damage to the epoxy resin.

When working on RO reverse osmosis water purification equipment, it is not necessary to adjust the time of the car relay. And the user should not shut down continuously for a short period of time during each shutdown, and it is necessary to shut down and shut down the water separately. That will be beneficial for increasing the service life of RO reverse osmosis water purification equipment.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题