Pure water equipment has been applied in various industries, and the most important thing is to use a booster pump to allow water to smoothly enter the reverse osmosis membrane for deep purification. And pure water equipment engineering is widely used by us in areas such as daily drinking, chemical industry, diagnosis and treatment, aquaculture, planting, food, beverages, etc. Pure water equipment often encounters some difficulties during operation. Below, the editor will explain the reasons for the high or low feedwater pressure of pure water treatment equipment. Let's take a look together.

The high water supply pressure of purified water equipment may be due to the following reasons:

1. It is possible that the outlet valve of the high-pressure pump of the purified water equipment may be improperly adjusted during use.

2. The pipeline between the high-pressure pump and the reverse osmosis device of the purified water equipment is blocked.

3. The concentrated water regulating valve is closed too tightly or blocked, resulting in a small discharge flow of concentrated water.

4. The recovery rate of purified water equipment is too low during operation.

If the pressure of the purified water equipment is too high, it is necessary to promptly check the water valve, pipeline blockage, concentrated water adjustment and other factors. When encountering situations where the water supply pressure of the purified water equipment is too low, it is necessary to check the above situations, check the water flow situation, check for water seepage, check the condition of the precision filter element, inspect the high-pressure pump, and troubleshoot one by one.

In order to ensure the reliability and service life of pure water equipment, we need to observe and record more in daily operation, and keep in touch. When encountering difficulties, we must check and handle them to prevent unnecessary troubles caused by mechanical failures.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题