Purified water equipment is a type of equipment used to produce purified water, and it is also widely used in the electronic industry for ultra pure water, alcohol manufacturing, and water for reducing alcohol content. It is also used in the early preparation of water for industries such as medicine and electronics, as well as desalination of seawater and brackish water; Water and wastewater treatment in industries such as papermaking, electroplating, printing and dyeing.

Pure water equipment has been applied in many industries, mainly relying on a booster pump to allow water to smoothly enter the reverse osmosis membrane for deep purification. Today, the editor is here to talk to you about the reasons that cause high water pressure in purified water equipment. Let's take a look together.

Reasons for high water pressure in purified water equipment:

(1) Improper adjustment of the high-pressure pump outlet valve.

(2) The pipeline between the high-pressure pump and the reverse osmosis device is blocked.

(3) If the concentrated water regulating valve is closed too tightly or blocked, the discharge flow of concentrated water will be small.

(4) The recovery rate is too low.

When high water pressure occurs, factors such as water valves, pipeline blockages, and concentrated water regulation should be checked in a timely manner, and appropriate methods should be taken to solve it. Below are two commonly used solutions:

1. By increasing the pressure of upstream treated water, adjust the concentrated water and production water pressure according to the RO inlet shut-off valve.

2. Open the outlet valve of the high-pressure pump and the inlet valve of the RO, or close the needle valve on the concentrated water pipe.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题