简体中文简体中文 VietnameseVietnamese PersianPersian 繁体中文繁体中文 AlbanianAlbanian IrishIrish ArabicArabic

What will happen if the pressure of the ultra pure water equipment is too high- Pure Water Equipment - Jiajie - Jiajie Pure Water Equipment Manufacturer


Ultra pure water equipment is composed of a reverse osmosis system and an EDI system. Both system software must be pressurized before they can work. Both systems have certain regulations on system pressure, especially for reverse osmosis system software. The pressure should not be too high, otherwise it will cause harm to the machinery and equipment. So, what happens when the pressure of the ultra pure water equipment is too high?

The reverse osmosis system software of ultra pure water equipment generally needs to achieve a pressure between 0.2 and 0.5 MPa during operation, and the fundamental reason is to fully utilize the regeneration characteristics to achieve good practical results; The pressure below 0.5MPa is to better ensure the actual effect of salt absorption.

1. When the water pressure is too high, carry out backwashing. If the hole of the rotating nozzle on top is very large and the level of epoxy resin swelling is relatively large, it is very easy for the epoxy resin to enter the multi way valve from above, causing epoxy resin leakage.

2. Abnormal gate valves can lead to unstable water index values. When the water pressure is too high, an unmeasurable pressure is generated on one side of the multi way valve, which is also likely to occur on the porous plate. During the operation of the gate valve, it may be particularly difficult to smooth, and it may also cause the gate valve to not turn on and off the power in a timely manner, resulting in the water body not meeting the expected actual effect.

3. When the water pressure is too high and physiological saline must be introduced again, a lot of water must be introduced into the salt tank. The high water level line may also lead to water overflow.

4. When the pressure of the ultra pure water equipment is too high, the efficiency of salt absorption will become increasingly fast, shortening the regeneration time and not achieving the actual effect of personal job description regeneration.


专业水处理的疑难问题,产品选型问题,可以单击下面的微信二维码电话联系贺工在线指导,长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题

佳洁纯水资深技术贺工
What is the reason for the blockage of the reverse osmosis m
Previous 2024年04月15日
What are the advantages of the secondary reverse osmosis pur
Next 2024年04月15日

相关推荐