When using pure water equipment, it's not just about switches, but also requires specialized operators to monitor and professional maintenance personnel to inspect. What are the general contents that need to be checked?

Pure water equipment must undergo rigorous inspections at the original factory before installation and delivery for use. Customers must accurately inspect the system software when accepting the machine equipment. If any damage is found, it indicates that the paint film should be repaired immediately. When installing, it is important to remember not to carry out arc welding, oxygen cutting work, etc. in the system software instructions to ensure that the internal lining is burned. After the installation of equipment works is completed and before commissioning, everyone must clean the machinery and equipment and their pipes until the water body reaches the standard of water quality testing, and then announce the delivery for use. After the announcement of operation, everyone must also carry out daily operation inspections and timely inspections. The actual operation personnel must inspect the machinery and equipment on the spot every day, keep good operation records, and inspect the machinery and equipment on time after one year of normal production and manufacturing to ensure that everything operates normally without accidents within the second year. Upon inspection, it was found that proper handling is necessary.

The daily inspection of pure water equipment is indispensable in the daily operation period. Do a good job in daily inspection to reasonably reduce the incidence rate of common faults of pure water equipment, so that the pure water equipment can operate stably for a long time and ensure the safety of power supply. There are actually the following aspects:

1. The actual operation staff should immediately search for the cause of any abnormalities in the machine equipment and report it immediately. In emergency situations, resolute measures should be taken. Common faults that cannot be cleared, unclear causes of common faults, cannot blindly follow the trend to open the machine equipment, and unresolved problems should be recorded and handed over to technical professionals for maintenance.

2. The actual operation personnel strictly follow the operation steps to open and close the machine equipment; The actual operation personnel should ensure three or more daily tours and inspections to ensure the normal operation of the machinery and equipment. All water pipes and connectors should be checked on time for damage and looseness, and attention should be paid to cold protection. Check the operation status of the centrifugal water pump and high-pressure water pump on time, and report any problems immediately.

3. Actual operators and maintenance personnel should often pay attention to maintaining the cleanliness and tidiness of the machinery and equipment, immediately remove dripping and leakage problems, and keep records and mark the parts that cannot be removed temporarily. Clean the filter screen and replace the PP cotton in the multimedia filter on time to achieve standardized solutions for mineral water.

If pure water equipment is not properly maintained and repaired, it will produce production water with poor actual results and reduce the service life of machinery and equipment. Therefore, it is necessary to master the new items that must be checked during the use of pure water equipment and how to correctly adjust the external key before using pure water equipment.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题