Temperature can cause significant delays in mechanical equipment. When lubricating deionized water equipment with grease, avoid adding too much oil. Otherwise, it can easily lead to high temperatures and damage to the equipment. The temperature of the management system will have a critical delay on the raw materials of deionized water equipment. When the temperature exceeds 100 ℃, the additional load and service life of the deionized water equipment will be greatly reduced. Nowadays, the dynamic and static additional loads are the limit values and multiplied by the corresponding temperature index. The basic principles and methods for enterprises to obtain the corresponding conclusion elements of relativity. Explain how to replace lubricating grease in deionized water equipment to solve common problems.

Deionized water equipment

(1) In the case of high friction resistance, cleaning supplies are needed. Clean with a pure cotton cloth, and after cleaning, use WD40 as an auxiliary cleaning agent to clean the surrounding dirt.

(2) After cleaning, hold the handle tightly to the edge and gradually move towards the same overall goal. Observe whether the product is worn out. If your fingers feel rough edges, pay attention to checking. It is possible that the deionized water equipment is worn out. Now, push the handle gradually to check whether the friction resistance of the product here is very high and whether it is very difficult to push. In cases of high frictional resistance, immediate replacement is required.

(3) When cleaning the motor, pay attention to whether there are small marbles in the motor. If marbles are found, the synchronous belt deionized water equipment needs to be cleaned up and replaced with guide rail sliders

(4) Gently push and listen to the sound of dragging. If the conflicting sound is very loud, it needs to be replaced.

(5) Check the magnetic density of the motor rotor to see if it is aligned in front, back, left, and right. If not aligned in front, back, left, and right, it can easily lead to a decrease in the service life; The deionized water equipment needs to be adjusted and resolved upon arrival.

Therefore, in the long-term storage of lubricating oils and fats, they should be stored in a dry, boring, and naturally ventilated environment, avoiding direct sunlight exposure of deionized water equipment. They should be checked on time for any modifications to ensure their quality and practical application effects.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题