With the popularization of modernization, the key efficacy of reverse osmosis equipment in the electronic industry, mainly in the production and manufacturing of electronic components, is becoming increasingly prominent. The quality of purified water has become one of the key factors that endanger the quality of electronic components, the yield rate of production and manufacturing, and the cost of products. Water quality regulations are also getting higher and higher. In the production and manufacturing of electronic components, industrial pure water is mainly used for cleaning tap water and preparing various aqueous solutions and slurries. The use of pure water and the regulations on water quality vary in the production and manufacturing of different electronic components.

The basic whole process of cleaning water purification equipment

1. Pump clean, chlorine free RO reverse osmosis water from the cleaning tank (or relative water source) into the pressure vessel and discharge for more than ten minutes.

2. Prepare cleaning solution in the cleaning box with clean commercial water.

3. Cycle the cleaning solution in the pressure vessel for 1 hour or at a pre-set time.

4. After the cleaning of the reverse osmosis equipment is completed, clear the cleaning box and carry out flushing, then fill the cleaning box with clean water for the next flushing step.

5. Pump clean, chlorine free water from the cleaning tank (or relative water source) into a pressure vessel and discharge for more than ten minutes.

6. After washing the purified water equipment, run the ro reverse osmosis management system with the water discharge valve open until the water is cleaned and there is no foam plastic or cleaning agent (generally 15~30 minutes).

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题