If water treatment equipment is not well managed, it has certain limitations for our own development. Regardless of whether it is done well or not, we must do this step well. How should we manage these equipment properly?

Sewage treatment equipment is generally installed by sewage treatment enterprises, and the employees of the sewage treatment company are taught and trained to manage it themselves. The maintenance and repair in the middle and later stages are generally carried out by sewage treatment enterprises in accordance with the commitments in the contract. Timely maintenance refers to the timely maintenance of equipment based on its application status, which can improve the equipment's availability and maintain a stable condition. On site maintenance refers to the immediate recovery of common faults that occur. Application companies, practical operators, and maintenance personnel should register to participate. The cause of common faults should be analyzed first, and maintenance plans should be formulated. Do not blindly follow the trend of disassembly and assembly.

1. We should make a decision to replace some traditional, low annual output value, and highly difficult sewage treatment equipment with high annual output value and high-tech products. If the annual profit of a certain product cannot cover the annual cost of wastewater treatment, such a product should make up its mind to terminate production and replace it with a product that is less environmentally polluting and easy to clean up.

2. The air pollutants in wastewater are all raw materials, semi-finished products, finished products, and reactive substances (such as organic solvents) that enter the water during the processing. Especially in biochemical production and manufacturing, some chemical changes are usually not very safe, and the entire process of separating goods is not very complete. Therefore, wastewater, especially in the reactive hydrolysate, often contains a certain amount of effective chemical substances. Pollutant discharge, a chemical substance that pollutes the environment, can cause environmental pollution and have adverse effects. But if recycled or developed in multiple ways, waste can be utilized and harm can be turned into profit; Alternatively, by treating waste with waste, enhancing strengths and addressing weaknesses, and improving the environment, water treatment costs can be saved.

3. For areas with relatively centralized processing plants, there is no need to set the standard of "whoever pollutes the environment, who cleans it up". Instead, it is necessary to enhance the communication between companies and comprehensively consider the prevention and control measures for environmental pollution. If necessary and very likely, the wastewater from each processing plant can be centrally transported, a unified sewage treatment plant can be established, and a "whoever pollutes the environment, who pays" remediation method should be implemented.

4. Company management is also a key element in preventing environmental pollution. Such as equipment running, emitting, dripping, and leaking; The production and manufacturing safety accidents or damage to goods caused by not following safety operating procedures result in many high concentration wastewater; Using a lot of water to clean equipment and road surfaces leads to an increase in wastewater volume; The failure to ensure clear and turbid separation between cooling circulating water and production wastewater will increase the water flow rate and the difficulty coefficient of wastewater treatment.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题