The model selection of softened water treatment equipment can be based on the water consumption, raw water hardness, and available location. Below, the editor will actually explain to everyone how the model selection of softened water treatment equipment is carried out?

1、 Select based on water consumption

There are many types of water outlet equipment, which can be selected based on the specific condition of the tap water.

2、 Select based on different raw water hardness

1. When the hardness of the raw water is below 3M · mol/L, precise measurements can be carried out on time based on the equipment's limited water production rate.

2. When the hardness of the raw water is less than 6m · mol/L, the selection can be based on the limited water production capacity of the equipment in the table.

3. When the hardness of the raw water is less than 8 meters · mol/L, the model and specifications can be selected based on the average water production capacity of the equipment.

4. The hardness of the raw water is 8-10 meters · mol/L, calculated based on the low limit water production capacity of the equipment or multi-level system software.

5. When the hardness of the raw water exceeds ten meters · mol/L, a multi-level solution should be chosen, and generally a second level solution can meet the requirements.

3、 Select based on the location of tap water

If gas boilers or other similar equipment are applicable, the model with limited water production capacity can be selected according to the equipment; If power is supplied to a gas steam boiler, it is generally paired with the equipment's water production capacity at 1.2 times the evaporation of the heating furnace water surface.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题