简体中文简体中文 VietnameseVietnamese PersianPersian 繁体中文繁体中文 AlbanianAlbanian IrishIrish ArabicArabic

Operating methods and installation maintenance of medical water treatment equipment - Pure water equipment - Jiajie - Jiajie Pure Water Equipment Manufacturer


Operating methods for medical water treatment equipment:

1. Have the ability to handle comprehensive wastewater and similar organic chemical wastewater in hospital information systems;

2. The complete set of medical water treatment equipment has a simple structure and convenient practical operation. All mechanical equipment is equipped with automatic control systems, and all equipment can be set below the soil layer;

3. The management method and maintenance of medical water treatment equipment are convenient, and the equipment is equipped with an automatic control system. The usage period exceeds 30 years.

Installation and maintenance of medical water treatment equipment:

1. Basic: If the medical water treatment equipment is placed on the wooden floor, only a concrete floor with the same appearance as the equipment needs to be prepared in advance as the basic. Basically, the work pressure must exceed 4T/m2, and it must also be at a level and level. If the equipment is buried underground, the height must generally be less than or equal to the height of the equipment, and it should be ensured that there is no water stored on rainy days. Generally, it is cement concrete (structural reinforcement depends on local geological and environmental standards).

2. Installation: According to the installation diagram, each box should be placed in sequence, and the position and orientation of the box should not be confused. The spacing between each box must be precise, and the pipeline should be connected.

3. Introduce water into the medical water treatment equipment and check if each pipeline is leaking. If there is no leakage, cover the soil layer around the box until the equipment inspection hole level the road surface. Connect the control line of the electrical control system box to the centrifugal water pump, and connect the switch power supply of the electrical control system box to the switch power supply. When wiring, be sure to pay attention to the orientation of the cooling fan and motor, which must be the same as the orientation of the cooling fan.


专业水处理的疑难问题,产品选型问题,可以单击下面的微信二维码电话联系贺工在线指导,长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题

佳洁纯水资深技术贺工
What are the main characteristics of EDI ultra pure water sy
Previous 2024年04月15日
What are the process selection and common problems for large
Next 2024年04月15日

相关推荐