In daily life, there are two key types of sewage environmental pollution: domestic sewage treatment environmental pollution and organic waste gas environmental pollution. Relatively speaking, the difficulty of solving environmental pollution is relatively high, and many organic chemical elements are complex among them. The harm to everyone's physical and mental health is obvious. If long-term and reasonable rectification is not possible, it will cause many diseases to the human body and pose a clear threat to the natural environment.

Below, we will introduce to you the solutions for industrial production waste gas treatment machinery and equipment:

1. Masking method

Principle: The exhaust gas treatment machine equipment selects a more obvious combination of fragrant smell and odor to mask the odor and make it acceptable to others.

Scope of application: Suitable for places that require immediate or temporary removal of lower concentrations of odorous gas hazards, with a compressive strength of 2.5 or above for odor, and unorganized emission sources.

Advantages: It can eliminate odor hazards as early as possible, with strong coordination ability and low cost.

2. Dilution external diffusion method

Principle: The exhaust gas treatment machine equipment will discharge odorous gases into the air through the chimney, or dilute them with odorless gas to reduce the concentration of odorous substances and reduce the odor.

Scope of application: Suitable for solving odorous gases emitted by institutions with medium to low concentrations.

Advantages: Low cost and simple machinery and equipment.

3. Heating ignition method and catalytic combustion device method

Principle: The waste gas treatment machine equipment mixes odorous substances with natural gas sufficiently at high temperatures to complete complete complete ignition

Scope of application: Suitable for solving flammable gases with high concentration and small supply volume.

Advantages: High efficiency in purification treatment, and complete oxidation and decomposition of odorous substances.

4. Water digestion and absorption method

Principle: The utilization rate of waste gas treatment is that some substances in the odor are soluble in water, causing the odor components to immediately come into contact with water, thereby melting the strong electrolyte and achieving the goal of thin film evaporation.

Scope of application: Odorous gases emitted from water-soluble and organic sources.

Advantages: The processing technology is simple, the management method is convenient, and the operating cost of machine equipment is low, causing secondary pollution. It is necessary to solve the problem of cleaning solution.

5. Medicinal solution digestion and absorption method

Principle: Waste gas treatment can utilize the characteristics of chemical changes caused by certain substances and medicines in odor, and remove some odor components.

Scope of application: Suitable for solving odors with high air volume and ordinary high and medium concentration values.

Advantages: It can purposefully solve some odor components and has a relatively complete processing technology.

6. Suction method

Principle: The utilization efficiency of waste gas treatment is achieved by the adsorption effect of the absorbent, which causes the migration of odorous substances from the liquid phase to the solid phase.

Scope of application: Suitable for solving odor gases with lower concentrations and high purification treatment regulations.

Advantages: The purification treatment has high efficiency and can solve multi-component odor gases.

7. Clean activated sludge method and thin film evaporation method

Principle: The waste gas treatment machine equipment sufficiently touches the mixture of foul smelling substances and suspended solid slurry to remove them from the odor in the purification tower. The cleaning solution is then sent to the tubular reactor to dissolve and dissolve the foul smelling substances based on the metabolic theme of floating and developing microbial species.

Scope of application: It has a wide range of applications and can solve the odor of air volume. In addition, the actual operating standards are easy to control and occupy a small area.

8. Hydrolysis acidification tank type activated sludge process membrane evaporation method

Principle: The waste gas treatment machine equipment disperses the foul odor substances into the mixed liquid containing activated sludge method through hydrolysis and acidification tanks, and dissolves the foul odor substances according to the floating growth and development of microbial strains, with a wide range of applications.

Scope of application: Currently, it has been used in Japan to solve the odor of fecal treatment plants and sewage treatment stations.

Advantages: After being trained, the activated sludge method can achieve a sludge load of over 99.5% for odor components that do not exceed the limit load.

9. Three phase multi substance catalytic reaction processing technology

Principle: The reaction tank of the waste gas treatment machine equipment is filled with specially made solid composite filling material, and the filling material is mixed with multiple metal catalysts inside. When the foul odor gas passes through the filling layer under the effect of the centrifugal fan, it is mixed with a highly efficient liquid phase reducing agent that emits mist according to the specially made nozzle and sufficiently touches the surface of the solid phase filling material. Under the catalytic reaction of multiple metal catalysts, the environmental pollution factors in the foul odor gas are fully dissolved.

Scope of application: It has a wide range of applications, especially in solving organic waste gases with high air volume and medium concentration, and has a very good sludge load on hydrophobic environmental pollutants.

Advantages: Small footprint, low project investment, and low operating costs; The management method is convenient and ready to use.

10. Technical aspects of ultra-low temperature plasma technology

Principle: During the entire process of material blocking charge and discharge in waste gas treatment machinery and equipment, plasma technology generates particles with extremely high organic chemical specificity, such as electronic devices, positive ions, oxygen radicals, and high spin molecular structures. The environmental pollutants in organic waste gas react with this specific functional group with high efficiency energy, which is then converted into substances such as CO2 and H2O, thereby achieving the goal of purifying waste gas.

Scope of application: It has a wide range of applications and high efficiency in purification and treatment, especially in the application of multi-component odorous gases that cannot be solved by other methods, such as chemical plants, pharmaceuticals, and other fields.

Advantages: High electronic energy, basically able to separate and collect all odorous gases. Common problems and solutions of single pulse bag filters.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题