In general, after customers purchase ultrapure water equipment, the manufacturer will provide completely free installation services, and some manufacturers may not be responsible for on-site service installation. In this case, customers must install it themselves. Recently, many customers have inquired about how to install ultrapure water equipment correctly? Today, I will introduce to everyone the common problems encountered during the installation and application of ultra pure water equipment.

In order to ensure the normal and stable application of ultra pure water equipment, it is necessary to pay attention to some difficulties during installation.

The key to installing ultrapure water equipment includes three parts: the moving and installation of the equipment, and the construction difficulty coefficient of the ultrapure water equipment water shop is relatively high. Equipment for manufacturing pipeline supports and their pipelines. When moving equipment, it is important to pay attention to the development of detailed equipment safety construction plans, especially for overloaded, oversized, and vulnerable equipment. It is strictly prohibited to engage in rough exploration of engineering construction. The construction of the same scaffold should pay attention to two stages:

1. The ultra pure water equipment has a good and stable water outlet, and the equipment operates very accurately. However, the regulations on seepage are relatively high. In addition, there are also some matters that must be paid attention to throughout the management process. Here are some simple summaries for everyone.

What should be noted when installing ultrapure water equipment?

2. Among positively charged organic compounds, those with higher relative molecular weight are more easily adsorbed on the surface of the membrane. When the oil content is higher than 0.1 milligrams per liter, or when the TOC in the influent is higher than 3mg per liter, the preparation and treatment range of ultrapure water equipment should be increased. This is mainly because this chemical substance is very prone to biological invasion, which can cause environmental pollution and harm the membrane's working characteristics. To avoid such situations, the membrane can be cleaned on time.

The above is a detailed introduction to what to pay attention to when applying ultrapure water equipment. It is crucial to master the difficulties that may occur in the application of ultrapure water equipment, and be able to handle them in a timely manner and immediately.

3. The installation site of ultra pure water equipment should be leveled, with a clean and tidy natural environment, closely attached to the switch power supply and water resources. Do not come into contact with or be in proximity to open flames and all heating devices. Ultra pure water equipment should not be installed outdoors in the North China region to prevent internal locking of the equipment, damage to the instrument panel and filter components. The installation location of the equipment should be able to facilitate the drainage pipeline, ensuring that the drainage pipeline of the equipment is maintained smoothly. When water resources work under pressure< 0.12Mpa, total flow rate< At 3.0T/H, the equipment will continuously experience multi-stage centrifugal pump start-up, termination, and start-up during operation. At this point, the equipment needs to be shut down to avoid damaging the motor. In areas with insufficient pressure and total flow, please lift the original water storage tank in front of this equipment. The commonly used water pump pressure in ultra pure water systems is guaranteed to be between 1.0 and 1.2 Mpa, ensuring that the water pump operates within its rated pump head range.

The above content is the common problems encountered during the installation and application of ultra pure water equipment, hoping to be helpful to everyone.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题