With the development trend, the application of pure water treatment machinery and equipment can be encountered in any field. However, in the operation of pure water treatment machinery and equipment, there will be difficulties in slowing down water speed, which is caused by the public? How to solve it? Below, the editor will bring you a solution to the slow water speed of pure water treatment equipment.

1. Due to membrane blockage and long-term failure to replace or clean the pre filter, the water inside the equipment is much worse than before. The source water body is relatively weak, but the proportion of wastewater is small, which leads to blockage of the wastewater relay or cleaning composition valve, resulting in no more wastewater or very little wastewater, causing membrane blockage and short service life of the purified water equipment.

2. If common faults occur in the transformer, it is not possible to show the working voltage required for normal transformer operation of the pump. If the speed ratio is slow, the transformer voltage is small, and the transformer voltage is small. Of course, it is not possible to achieve the required working pressure for drinking water according to the RO reverse osmosis membrane, and at this time, the water production will be delayed. According to professionals, after removing key elements such as pumps and membranes that pose a threat to slow water production and manufacturing, a new transformer must be replaced for experimentation.

3. Blockage of the filtration device is one of the common problems in pure water equipment. At present, secondary pollution of drinking water is becoming increasingly serious. If we catch up with the maintenance of the pipeline, it can be said that the filter element is blocked. In industrial production, if there is a lack of professional maintenance personnel, the filter element is rarely replaced, so blockage is very common. The replacement of filter elements is particularly important for increasing the service life of machinery and equipment. Staff should be assigned on time for maintenance and replacement to ensure smooth operation.

4. The check valve is blocked, and sometimes the check valve is also blocked. Although such situations are very rare, we can take out the check valve during inspection to see the water flow condition. If there is a significant change in water output after disassembly and before disassembly, it indicates that the check valve is indeed blocked.

Above is a detailed introduction to solutions for slow water speed in pure water treatment equipment, hoping to be helpful to everyone.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题