1. If installed outdoors, it is necessary to have anti freezing measures. Without anti freezing measures, it is very likely to cause the filtration device, membrane shell, etc. to freeze and break. If the temperature is below zero degrees, it is necessary to stop using the water purification equipment.

2. It is necessary to ensure that the room temperature is not less than 0 degrees Celsius when installed in the room, because the volume of water will swell during the entire condensation process. If it freezes, it will immediately cause all pipelines, filtration devices, membrane shells, etc. of the water purification equipment to crack, resulting in water seepage.

3. If water purification equipment is not used for a long time or if it is necessary to go out, it is necessary to close the seepage gate valve and drain all the water in the pressure tank. Before reapplying, check the appearance of the equipment to ensure everything is normal before connecting to the water resource switch power supply. The first bucket of water produced is also suggested to be drained.

4. Solution when encountering freezing

It is necessary to place the entire water purification equipment in a room with a temperature higher than 10 ℃. Of course, it can only be used again after two days of unfreezing. During this period, water treatment cannot be forced to start up. After starting up, check for water leakage.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题