During the operation of boiler softened water equipment, attention should be paid at all times, as any problems may affect the hardness index of the effluent water quality. Below, I will introduce to you the precautions that need to be taken during the operation of boiler softened water equipment.

1. The boiler softening water equipment does not produce softening water, and the reason why the boiler softening water equipment does not produce softening water is that the bypass valve is not open. Opening the bypass valve can solve this problem.

2. The resin problem in boiler softening water equipment

(1) The resin leakage caused by the softening water equipment of the boiler during operation or the entire process of salt absorption is called resin leakage, which may be caused by the cracking of the upper rotating nozzle or the high working pressure of the softener water seepage. Can you check if the rotating nozzle is damaged? If it is not, you can try to reduce the working pressure of water seepage to solve the problem.

(2) The occurrence of ineffective resin is highly likely due to unsuccessful reconstruction, and resin reconstruction should be carried out again.

3. The problem of salt tank and pressure in boiler softened water equipment is difficult. The solution is to check if the salt in the salt tank is sufficient and add salt to more severe cases. The water inlet is blocked due to low discharge, and the solution is to clean and connect the inlet or upgrade the inlet.

4. Problem with boiler softened water equipment's water supply pipe and inlet valve, solution for water supply pipe cracking, inspection of water supply pipe, upgrading of cracked water supply pipe. The solution to water seepage in the water gate valve is to inspect the water gate valve to ensure that everything is normal, in order to prevent water seepage from causing harm to pressure.

5. The boiler softened water equipment is not running, and if the machine equipment is not running, it may be due to an abnormality in the switch power supply system. The solution is to check the switch power supply system software to ensure that the softened water equipment can be plugged in normally. The solution to the control board setting problem is to reset the control board to ensure that the controlled machine equipment is appropriate.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题