Purified water equipment is a commonly used water purification equipment in our daily lives, which is an artificial product to ensure drinking water. The performance of this device directly affects its work efficiency. To ensure its work efficiency, it is necessary to connect various skills of the equipment in a more coordinated manner and do a good job in installation. So how should reverse osmosis purified water equipment be installed?

1. The installation location can be in areas such as garages and outdoor equipment rooms;

Before installing water treatment equipment, corresponding space, inlet and outlet pipe interfaces, sewage pipes, and single-phase three wire five eye sockets should be reserved, with a voltage of 220V. The specific dimensions shall be based on the floor after decoration;

3. A 1-inch or 3/4 external wire interface should be reserved at the inlet and outlet of the purified water equipment, with a center wheelbase of 10-15cm. Their vertical distance from the ground should be set according to the size of the equipment;

4. If the water treatment equipment needs to be installed outdoors, measures such as sun protection and anti freezing should be provided; The required space for equipment installation is: 50 millimeters in front, 50 millimeters in back, 50 millimeters on the left, and 50 millimeters on the right, and 100 millimeters on the top;

5. Do not place water treatment equipment near heat sources. If it is to be installed at the heat source, insulation facilities need to be installed;

6. The water treatment equipment will be connected to a sewage hose to connect the reserved sewage pipe. The height of the reserved sewage pipe should reach 40cm. Its position should be as close to the wall as possible, and the distance from the equipment should not exceed 50cm; If the equipment is placed outdoors, sewage can be directly discharged into the sewer;

7. The power socket should be installed above the water treatment equipment, and the distance from the equipment should be within one meter;

8. For cabinet equipment, when decorating the cabinet, the installation size of the water treatment equipment should be considered and corresponding space should be reserved;

If the water supply pressure is less than 2kg, a booster pump should be installed at the back end of the water meter and the front end of the equipment.

Alright, that's all for the installation of purified water equipment. If you have any questions, please feel free to consult us. We will be dedicated to serving you.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题