In the application of water treatment equipment, if water leakage is found, what is the best way to solve it? Today, the editor will take you to understand the measures to solve water leakage in water treatment equipment.

Solution measures for water treatment equipment leakage

1. Leakage of diaphragm pump in water treatment equipment

In this case, the pneumatic diaphragm pump needs to be dismantled for maintenance or replacement; Attention should be paid: After the maintenance is completed, strict follow-up visits should be carried out to determine if there is any water leakage:

① Wipe clean any remaining water with a damp cloth.

② Touch the connection head with dried tissue and observe if the tissue is wet with water.

2. Leakage at the connection part of the hose joint of the water treatment equipment

The reason is usually that the hose is not inserted in time in the quick connector. At this time, as long as the hose is pulled out and inserted again, there will be a touch when the hose is inserted in time, and a lock will be added later. If there is water leakage, it is necessary to check:

① Is there any dirt inside the connector that could harm the sealing performance? If it is necessary to eliminate it.

② Is the surface of the hose damaged? There are significant grooves and leaks. In this case, the damaged section of the hose should be removed or replaced, and the hose should be placed strictly according to operating procedures.

The above is the solution for water treatment equipment leakage, hoping to be helpful to everyone.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题