Reverse osmosis equipment is a type of membrane separation equipment that uses selective membranes to select and separate membranes, driven by the pressure difference on both sides of the membrane. It is widely used, but over time, abnormal situations may occur, leading to sudden shutdown during operation. What should be done?

When a sudden shutdown occurs during the application of sewage treatment equipment, the reverse osmosis equipment manufacturer needs to manually shut down the sewage pump and dosing equipment for rectification. If the commonly used system software stops running due to power outages, and only the sewage treatment equipment server stops running, it is fully considered that it is caused by power supply issues. It can be checked whether there is a short circuit fault in the power cord of the sewage treatment equipment host or the electronic control system. Generally, the hardware configuration of the sewage treatment equipment server is not easily damaged.

If the reverse osmosis equipment suddenly shuts down during the entire application process, the reverse osmosis equipment manufacturer suggests that everyone must clean all membrane system software with pure water or low voltage prepared water output, clean the concentrated water on the membrane surface, and avoid acid salt deposition and crystal fouling of the membrane; Whether in use or discontinued, it is essential to ensure the hygiene and disinfection of the membrane components of the reverse osmosis equipment to prevent the growth of bacteria in high-pressure containers.

Therefore, after the application of sewage treatment equipment, early maintenance and upkeep should be carried out to prevent the common faults mentioned above, while increasing its service life.

Common problems in daily maintenance of reverse osmosis equipment

Reverse osmosis equipment is widely used in industries such as pharmaceuticals and microbiology, but it is unlikely that all machinery and equipment will not have problems during use. The quality of water in machinery and equipment will gradually decrease after being used for a long time. Therefore, it is necessary to do regular maintenance in daily life. Let's take a look at common problems in the daily maintenance of reverse osmosis equipment manufacturers

The reverse osmosis equipment manufacturer has discovered common faults and should immediately repair and maintain them. When conducting maintenance on this common malfunction, it is important to first understand how this common malfunction occurs. Due to the unscientific design of RO reverse osmosis equipment, water bodies, or other reasons, this must be clear at a glance in order to prescribe the right medicine and eliminate the disease.

Reverse osmosis equipment manufacturers should pay attention to timely disassembly and replacement of filter elements during daily maintenance. Nowadays, our concept of nutrition and health is becoming stronger, and the demand for water quality is also increasing. The filter element of water purification equipment must be replaced on time to ensure the water body and taste.

When the reverse osmosis equipment manufacturer discovers that the pressure difference between import and export trade exceeds the standard in the application of machinery and equipment, it indicates that the membrane surface has been damaged or the given water volume exceeds the design value. If the pressure difference cannot be addressed by adjusting the total flow rate, the membrane surface should be cleaned; When the reverse osmosis equipment stops running, replace the water in the reverse osmosis equipment with low-voltage water supply and drainage. This is also to avoid the precipitation of silica during shutdown (due to the decrease in water temperature during winter).

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题