Adding salt to the softened water equipment is a practical operation in the daily operation process of the softened water equipment, and whether its operation is standardized is closely related to the operation of the softened water equipment. Below, the editor will share with you what precautions must be taken when applying salt to the softened water equipment.

Precautions for adding salt to softened water equipment

1. Prohibit the use of industrial salt and iodized table salt. Iodine has strong penetration on the surface of resin particles. Long term use of sea crystal salt will reduce the surface compressive strength, strength, impact toughness, volume expansion compressive strength, and circular refractive index of the resin. The resin is very easy to crush, and resin exchange can only be reduced (referring to strong alkaline resin);

2. It is best to put salt into a cotton cloth bag, tie it up, and put it into the salt box to effectively avoid environmental pollution caused by non dissolving particles and blockage of the salt absorption system software;

3. The amount of salt involved is the resin amount (L) multiplied by 0.24Kg, which is the demand for salt;

4. The time for adding salt to the softened water equipment should be consistent with the time for resin regeneration;

5. The water level of the salt tank after adding salt should not be less than 2/3.

The above is a detailed introduction by Jiajie about the common problems when adding salt to the softened water equipment. The actual effect of adding salt to the softened water equipment is to regenerate the resin, which is easy to understand, to clean the resin. To understand the close relationship between salt, resin, and softened water equipment, resin relies on salt regeneration, and softened water equipment relies on resin to achieve softening of water bodies. I hope the above content can be helpful to everyone.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题