Pure water equipment may often encounter annoying problems such as excessive pH values and reduced water flow during use. So, what are the reasons for these two troubles? What are the solutions?

There are two conditions for being too high, compliant and non compliant. All normal purified water is slightly acidic or alkaline, and a high concentration indicates a slightly alkaline concentration. There are two situations where such difficulties occur:

1. Usually, excessive or siphonic caustic soda is added to the entire process of CO2 removal in the system software.

2. In this situation, the source water contains more hydrogen carbonate.

Reasons and solutions for the decrease in water flow rate of pure water equipment

1. Common faults of the equipment itself

It is normal for any machine or equipment to encounter difficulties over time. If the internal components of a household water purifier are blocked or not sensitive to operation, or if other internal components are damaged, these are immediately harmful to the purified water of the equipment. It is very common for water bodies to become turbid, decrease, or even fail to produce water.

Solution: After more than half a year of use, it is best for people to conduct regular inspections, maintenance, and upkeep of the internal components of the equipment every 2-3 to 6 months. This is a responsibility for people's drinking water physical and mental health. And regular inspection and maintenance can also increase the service life of equipment and internal components. That can ensure the water flow and water body of the product.

2. Common faults caused by filter element or membrane infiltration

Because the purified water of the equipment must be filtered according to the filter element and infiltration membrane, if these two types of spare parts are blocked or damaged, they can immediately endanger the water flow. They are the most critical filtering part of the equipment.

Solution: As filter cartridges or infiltration membranes often have application limitations, it is best to clean the products every 1-2 months after application to eliminate air pollutants and blockages inside the filter cartridges or infiltration membranes, ensuring the cleanliness of the products. It is not easy to encounter problems such as low water production rate and water mold during application.

3. Blocked or damaged tap water pipe

When people use water purifiers, the water pipe is the first to touch the water, and the water flow is transported by water. If the water pipe is damaged and causes seepage, the water production rate of the equipment will naturally decrease. If the water pipe is blocked, the equipment will naturally have less water output.

Solution: If the water pipe is damaged, immediately remove the damaged area. If the damage is significant, immediately replace the new water pipe. If the water pipe is blocked, use special tools and cold water to connect the inside. If there is too much sediment and blockage, immediately replace this new water pipe.

4. Water seepage at the interface of the water purifier

After a period of application, the metal material tee joint of the water purifier may rust, corrode, or the interface may not be tightened properly, resulting in water seepage at the connection head or the running water pipe, which may lead to a reduction in the water output of the water purifier.

5. Abnormal booster water pump

The function of the booster water pump is to transport water to the water purifier for cleaning, and if the equipment malfunctions and water cannot enter the product, it may not be easy to produce enough water.

Solution: Check which area of the booster water pump is facing difficulties, repair it if possible, or replace it with a new product if not possible.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题