Precautions for installation of softened water equipment:

a. This device must be placed in the room to prevent cold, sun protection, and isolation. When moving it, be sure to avoid collision;

b. During installation, a 0.5 meter gap should be left around for easy maintenance;

c. The working pressure for water seepage is specified to be between 0.2 and 0.5 MPa. If it does not meet the requirements, additional pressure relief measures can be taken to alleviate the pressure;

d. The customer should provide a self equipped soft water storage tank with a capacity that depends on the application situation to meet the water usage regulations. The soft water storage tank should have anti-corrosion measures to prevent the softening water from polluting the environment again;

e. There is no need for basic installation, it can be installed on the roadbed level, and there is a designated sewage treatment safety channel on the surrounding road surface;

f. Maintain the saturation concentration value of the salt solution, and the solid salt should be higher than the salt liquid level;

g. After installation, the pipeline should be cleaned to avoid blockage caused by residue and environmental pollution of the epoxy resin.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题