Today, the editor is here to share the leak detection methods for water treatment equipment, hoping to be helpful to you.

Leakage detection method for water treatment equipment

1、 Pressure method

When the high-pressure vessel is tested, the vessel or water treatment equipment is filled with water, and then water is introduced into the vessel using a pressure pump.

Due to the pressure of water, the surge of water is not significant, so it can be immediately pressurized. Therefore, once the vessel is damaged, the anchor bolts of the connecting parts break, and the washers fall off, it is not easy to cause risks. Sound method

The basic principle of the sound method is that when a vapor sprays out of a small hole, it will make a sound, and the size and frequency of the sound will depend on the malicious person who leaked it. The working pressure, pressure difference, and type of vapor on both sides.

This type of economic benefit method is very initial, distinguishing water treatment equipment from other methods by listening to sound to determine whether there is a leak. It can clearly indicate the sensitivity of the inspection. Water treatment equipment is a type of machine that uses various physical and organic chemical methods to remove harmful chemicals from water that are not used in production, manufacturing, and daily life. It is used to filter and purify water. Due to the close relationship between social development, production and manufacturing, daily life, and water, the application scope involved in the sewage treatment industry is very common, forming a huge industrial chain application. It has been widely applied in industries such as pharmaceuticals, microbiology, electronic devices, chemical plants, power plants, and wastewater treatment in China. The sensitivity of this type of method may be affected by the natural environment, but it is simple for economic development and is generally used in the ear and auscultation.

2、 Ultrasonic method

Ultrasonic method is a method of disconnecting the sound frequency in the leakage of water treatment equipment, and only enlarging and inspecting a part of the ultrasonic wave to detect the leakage. When it is detected that

When using ultrasonic waves, the meter head and needle can be immediately shaken, or the method of returning the ultrasonic waves to the audio range can be chosen. Water treatment equipment is a type of machine that uses various physical and organic chemical methods to remove harmful chemicals from water that are not used in production, manufacturing, and daily life. It is used to filter and purify water. Due to the close relationship between social development, production and manufacturing, daily life, and water, the application scope involved in the sewage treatment industry is very common, forming a huge industrial chain application. It has been widely applied in industries such as pharmaceuticals, microbiology, electronic devices, chemical plants, power plants, and wastewater treatment in China.

Under the noise standards of general processing plants, ultrasonic converters are not affected and only a portion of the ultrasonic waves are inspected, resulting in very good actual results. Soft water treatment equipment is a machine that reduces the hardness of water. The key is to remove calcium and aluminum ions from the water. During the entire process of softening water treatment, the soft water treatment equipment cannot reduce the total salinity in the water. It can be used to supplement the softening of water in central air conditioning and other system software, as well as to solve the problem of activated tap water. When identifying leakage points, adjust the sensitivity of the leak detector to a higher value and move the microphone when listening to abnormal areas;

Maximize the sound of ultrasound and then search for the location where the ultrasound is transmitted. Relatively speaking, this type of method has a relatively small difference, and regardless of who applies it, the results are all the same. Vulcanized rubber biological fiber facial mask 5, Vulcanized rubber biological fiber facial mask

Vulcanized rubber biological fiber facial mask means that the water treatment equipment is attached with a vulcanized rubber plastic film and plastic film tape, connected to the Buchner funnel, and the Buchner funnel is attached with a thin vulcanized rubber or plastic film. In case of leakage, the balloon will swell.

Large and medium-sized water treatment stations use this method to conduct visual inspection of fuel pipelines, and the results are the same regardless of who observed them, without any human error.

3、 Combustible gas detection methods

The combustible gas detection method refers to the application of a vapor other than gas to pressurize the tested vessel, and placing the bucket that reflects the vapor outside the vessel. In the case of a leak, the vapor flows outward and reacts with the chemicals in the bucket, which are then detected by a detector to reflect the chemicals. If a test strip is used to accurately measure ammonia leakage, in other words, this type of method is chosen. This inspection method is simple and suitable for many processing plants, but attention should be paid to the accuracy of the instruments and equipment. Radioactive Material Radionuclide Method

The radioactive substance radioactive nuclide method is applied to conduct leak testing on harmless radioactive substance vapors.

Charge the experimental vessel with gas containing a small amount of radioactive vapor, which will leak out once it leaks; Can be detected using flashing electronic counters, etc γ Radiation, so you can understand whether there is a leak and the approximate total number of leaks.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题