Principle of heating furnace soft water equipment:

The hardness of water is mainly composed of cations: calcium (Ca2+) and magnesium (Mg2+) ions. When the source water with strong ions enters the resin layer of the exchanger, the calcium and magnesium ions in the water are exchanged with the sodium ions in the resin. The resin absorbs the calcium and magnesium ions, while the sodium ions enter the water. In this way, the water discharged from the exchanger is treated as softened water that removes strong ions. With the continuous development of the entire exchange process, all Na+ions in the resin lose their exchange effect after being removed. At this time, it is necessary to use NaCl aqueous solution to regenerate the resin, replacing the Ca2+and Mg2+absorbed by the resin. The resin absorbs sodium ions again. When the resin digests and absorbs a certain amount of calcium and magnesium ions, it is necessary to carry out regeneration. The entire regeneration process involves cleaning the resin layer with salt water in the salt tank, replacing the strong ions on the resin, and discharging the regenerated wastewater out of the tank. The resin then repairs the softening exchange effect.

Characteristics of heating furnace soft water equipment:

1. High level of automation technology and stable power supply operation.

2. Excellent system control equipment, precise and reliable operation, replacing manual production, completely completing the fully automatic transformation of various stages of sewage treatment.

3. Efficient and energy-saving, operating at a cost of economic development. Because the overall design scheme of the softened water equipment is effective, the exchange capacity of the resin is fully utilized. The machine equipment uses water jet salt suction instead of salt pumps, reducing energy consumption.

4. The machine equipment has a compact structure, occupies a small area, saves infrastructure investment, is easy to install and adjust, and is easy to operate.

performance parameter

1. Hardness of effluent: 0.03mgN/L

2. Pressure: 0.2-0.5MPa Operating temperature: 2-50 ℃

3. Storage tank raw materials: fiberglass anti-corrosion/carbon steel lined rubber pipeline/stainless steel plate

4. Valve body material: High toughness plastic or copper

5. Total flow range: 1-100t/h

6. Working standard voltage: 380V/220V, 50/60HZ

7. Manipulation method: Time type, total flow type

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题